Product Details
The PiTray clip is an excellent Din Rail mounting solution for single - board computers such as Raspberry Pi. It's crafted from a 304 stainless - steel blended plate and a nylon clip with a spring. This combination offers a simple, rapid, robust, and long - lasting installation on Din Rails, ideal for industrial setups, home automation projects, and cluster building. It's compatible with a wide range of single - board computers, including Raspberry Pi 4B, 3A+, 3B+, 3B, 2B, 1B+, 1A, Zero W, Zero; NVIDIA Jetson Xavier NX Developer KIT, Jetson Nano Developer Kit, Jetson Nano 2GB Developer Kit; PINE64 Rock64, PINE H64 Model B; Hardkernel ODROID C4, C2, C1+; ASUS Tinker Board 2S, 2, T, S; Coral Dev Board; and Sourcekit PiTray mini. Key features include compatibility with IEC/EN 60715 Din Rails, a 1.5 - mm thick 304 stainless - steel PCB rack, a nylon (PA66 30GF) clip with a spring for easy mounting and dismounting, 2 pieces of 304 stainless - steel M2.5x4 bolts to fasten the PCB, a brushed polished finish with no rough edges. The shipping list includes 1 PiTray Clip and 1 set of attached screws.
Using the PiTray Clip is a breeze. First, make sure you have a Din Rail that complies with the IEC/EN 60715 standard. Then, take your PiTray Clip and use the nylon clip with the spring to quickly attach it to the Din Rail. It's very easy to mount and unmount, so you can adjust it as needed. Next, place your compatible single - board computer on the 304 stainless - steel PCB rack. Use the two provided 304 stainless - steel M2.5x4 bolts to fasten the PCB firmly. When it comes to maintenance, keep the clip clean. You can use a soft cloth to wipe off any dust. Avoid using harsh chemicals as they may damage the nylon or the stainless - steel parts. Also, make sure the spring in the nylon clip isn't over - stretched. If you're using it in an industrial environment, check regularly for any signs of wear and tear. In a home automation setup, just ensure it's securely mounted to avoid any accidental dislodging.
