Pogo Pin Probe Clip - 2x5 1.27mm Pitch SWD

The Professional Pogo Pin Probe Clip features a 2x5 arrangement with a 0.05 - inch pitch SWD spacing. It's an excellent tool for testing and connecting with high - precision without the need for soldering! Picture it as an alligator clip with an array of built - in springy pogo pins. This allows you to easily connect to a PCB with classic 'SWD' pad holes, eliminating the need for soldering or a special adapter cable. The clip is made from PCB sections, with a sandwich structure to support the thin pogo pins. The pogo pins are replicated into a 2x5 0.1 - inch header, making it compatible with everyday socket header cables. You can use these cables to connect to your programmer or adapter.

Using this pogo pin probe clip is easy. First, locate the classic 'SWD' pad holes on your PCB. Then, simply place the clip over these holes. The built - in springy pogo pins will make the connection for you without soldering. Next, plug an everyday socket header cable into the 2x5 0.1 - inch header of the clip. You can then connect the other end of the cable to your programmer or adapter. When using the clip, handle it gently as the pogo pins are thin and can be damaged if pressed too hard. Also, make sure the clip is properly aligned with the pad holes to ensure a good connection. For maintenance, keep the clip clean. You can use a soft brush to remove any dust or debris from the pogo pins. Store the clip in a dry place when not in use to prevent rusting.