Pi Tin for the Raspberry Pi - Clear

The Raspberry Pi is a beloved small computer, and you surely don't want anything bad to befall it. Protect it with this cool plastic enclosure! These cases safeguard the Raspberry Pi 3, RPi 2, and Model B+ from issues like rogue wires that could short - circuit it, while still allowing full access to the board. Just snap the RPi into the bottom half of the enclosure and then snap the two sides together. The enclosures are transparent, letting you easily see your Raspberry Pi and make any necessary adjustments. It has slots for accessing the GPIO peripheral header, USB ports, Ethernet, SD card, HMDI, 3.5mm jack, and CSI connectors. There are also feet and vents for proper cooling and plus - shaped wall - mounting slots. All the status LEDs on the Pi are visible through slots in the design. This is a really sleek case. Once you get a Raspberry Pi B+, you'll definitely want one of these enclosures. Dimensions: 9.5x6.2x2.7cm. Documents: Product Video

Using this enclosure for your Raspberry Pi is a breeze. First, take the bottom half of the enclosure and carefully snap your Raspberry Pi into it. Then, take the top half and snap it onto the bottom part to fully enclose the device. The transparent design allows you to keep an eye on your Raspberry Pi at all times. If you need to make any adjustments to the board, just open the enclosure and do what you need to. When it comes to the ports and connectors, you can easily access them through the slots provided. There are feet on the enclosure to keep it stable and vents to make sure your Raspberry Pi doesn't overheat. You can also mount it on the wall using the plus - shaped wall - mounting slots. As for maintenance, just use a dry, soft cloth to wipe the enclosure clean. Avoid using any harsh chemicals as they might damage the plastic. And that's it! With this enclosure, your Raspberry Pi will be well - protected and easy to manage.