Are you sad that your Game Boy days are over? Don't worry! With this pack, you can bring back the fun. We've gathered all the essential parts to help you build your own DIY GameGRRL, a portable Raspberry Pi that runs MAME and NES emulators. This version doesn't include the Raspberry Pi Zero W and it's a DIY kit. You'll need to 3D print the enclosure and assemble the project. If you want a version with the Pi Zero W, just click here! The PiGRRL is a portable game emulation station powered by a Raspberry Pi Zero W and a PiTFT display. You'll do the 3D printing, assembly, and installation on your own, but our learn guide will assist you. This pack has almost everything you need, except the case, battery, wires, hardware, and hand - tools for soldering and cutting. You'll need to 3D print your own case, and our 3D printing guide can help. You also need a 2000mAh lipoly battery, and we only guarantee it works with our batteries. Using the wrong battery can ruin your project. We've made it easier to build by creating a custom gamepad PCB, cutting the build time in half. You just need to solder the buttons and an IDC box header to the PCB. You'll also need to solder the parts together, so hand tools and small parts like silicone wires, screws, or blue tack are required. Read the tutorial to see what else you need. Note that this is a medium - difficulty project involving skills like soldering, 3D printing, and installing Linux. The PiGRRL Zero is a fun build, but it's a DIY project, so its audio, video, and emulation capabilities won't be perfect. The Zero is slower than the Pi 2 or 3 and can mostly emulate NES - complexity - max games.
Using the Pi GRRL Zero DIY Kit: First, gather all the necessary parts. You'll need to 3D print the enclosure using our 3D printing guide. Then, start assembling the parts. Solder the buttons and an IDC box header to the custom gamepad PCB, which we've made to simplify the process. After that, solder the rest of the parts together. Remember to use hand tools and small parts like silicone wires, screws, or blue tack. Install the 2000mAh lipoly battery, but make sure it's the right one as using the wrong battery can damage your project. Follow our learn guide for the installation process. Attention! This is a medium - difficulty project. You'll need skills like soldering, 3D printing, and installing Linux. The PiGRRL Zero is a DIY project, so don't expect perfect audio, video, or emulation. It's slower than the Pi 2 or 3 and mainly emulates NES - complexity - max games. Maintenance: Keep the kit in a dry and clean place. Check the soldered parts regularly for any loose connections. If you need to replace the battery, always use a 2000mAh lipoly battery from us.
