GHR-04V to GHR-06V Cable - 1.25mm pitch

This awesome cable is made to link the RTK Surveyor product line with well - known Serial Telemetry Radios. Not only that, it's a great pick for other projects too! You can customize it easily. Cut and strip the cable to make your own 4 - pin or 6 - pin cable with GHR 1.25mm pitch connectors. And if you need to move pins around, just use an exacto knife to remove the wires. There's also a GHR Connector Datasheet available.

Using this cable is a breeze. First, if you want to use it for the RTK Surveyor and Serial Telemetry Radios, just connect the appropriate ends. For other projects, you can cut the cable to the length you need with a sharp cutter. Then, strip the ends to expose the wires for connection. If you need to re - arrange the pins, use an exacto knife to carefully remove the wires. When handling the cable, be gentle to avoid damaging the connectors. To keep it in good condition, store it in a dry and cool place. Avoid bending it sharply or pulling it too hard, as this can break the internal wires.