1.8inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 160×128, SPI

This 1.8 - inch LCD display module is designed specifically for the Raspberry Pi Pico. It offers 65K RGB colors and a 160×128 pixel resolution, delivering a clear and vivid display. With an SPI interface, it only needs a few IO pins. The module comes with an embedded ST7735S driver that uses the SPI bus. You'll also get development resources and a manual, including Raspberry Pi Pico C/C++ and MicroPython examples. It has a female pin header onboard for direct attachment to the Raspberry Pi Pico, but the Raspberry Pi Pico itself is not included. Check the 'Pico - LCD - 1.8' WIKI page for detailed resources, as they may vary by product.

Using this 1.8 - inch LCD display module with your Raspberry Pi Pico is easy. First, connect the module to your Raspberry Pi Pico using the onboard female pin header. Then, you can start programming it with the provided C/C++ or MicroPython examples. For best results, make sure your Raspberry Pi Pico has the necessary software environment set up. When handling the module, be gentle to avoid damaging the pins. Keep it in a dry and clean place to prevent dust and moisture from affecting its performance. If you run into any issues, refer to the WIKI page 'Pico - LCD - 1.8' for troubleshooting tips and additional resources.