The Raspberry Pi is a beloved compact computer, and safeguarding it is a must. Our stylish black plastic Pi Tins are here to offer top - notch protection. These enclosures are designed to shield the Raspberry Pi 3, RPi 2, and Model B+ from potential hazards like stray wires that could cause short - circuits. At the same time, they allow full access to the board. It's super easy to use - just snap the RPi into the bottom part of the enclosure and then join the two sides. The opaque black color of these Pi Tins is ideal for making your Raspberry Pi blend seamlessly with black surfaces, giving your project a more refined look. The enclosure comes with well - placed slots for accessing the GPIO peripheral header, USB ports, Ethernet, SD card, HMDI, 3.5mm jack, and CSI connectors. It also features feet and vents for proper cooling and plus - shaped wall - mounting slots. All the status LEDs on the Pi are visible through the slots in the design. This is truly a great case for your Raspberry Pi. Dimensions: 9.5x6.2x2.7cm. Documents: Product Video
Using this Pi Tin is a breeze. First, open the enclosure and gently snap your Raspberry Pi into the bottom half. Then, snap the top part onto the bottom. Make sure it's properly aligned so all the ports and connectors match up with the slots in the case. When using your Raspberry Pi in the Pi Tin, avoid exposing it to extreme temperatures as this can affect the performance of the computer. Also, be careful when plugging and unplugging cables to prevent any damage to the ports or the case. To keep your Pi Tin in good condition, you can use a soft, dry cloth to wipe it clean. If there are stubborn stains, a slightly damp cloth can be used, but make sure to dry it thoroughly afterwards. That's all there is to it - enjoy using your protected Raspberry Pi!
