The Monoprice Inventor II 3D Printer is an ideal entry-level choice. It has a compact design and offers reliable performance. With built-in WiFi, you can say goodbye to cable tethers. The 3.5' color touchscreen makes settings and feedback a breeze. Its enclosed chassis protects your prints. You can upgrade it with a heated bed to keep the build volume warm. The automatic sensor door pauses any ongoing print job when opened, ensuring safety. The filament checker holds prints when there's a material shortage or jam. The bed leveling probe helps you get the first layer right on the first try. This printer gives you high - quality prints with less hassle, all at an affordable price. Specifications: Model 30525, Build Size 150 x 140 x 140mm, 1 extruder, 3.5' color IPS touch screen, Build Accuracy (+/-) 0.1mm, Build Speed 10 - 200mm per sec, 1.75mm PLA Spool (+/-) 0.07mm filament, XY Axis positioning accuracy 0.011mm, Z Axis 0.0025mm, Print Precision (+/-) 0.10mm, Layer Thickness 0.05 - 0.4mm, 0.4mm nozzle diameter, MP FlashPrint software, Max Extruder Temperature 240ºC, Supports 3MF, STL, OBJ, FPP, BMP, PNG, JPG, JPEG input formats and G, GX output formats, Connect via USB Cable, USB Stick, or Wifi, Works with Windows XP and later, Mac OS X, Linux, Input Power 100 - 240V/50/60Hz, No Heating Plate, 65 Watts power consumption, Dimensions 420 x 420 x 420mm, Printer weight 11kg (16kg with packaging), Carton Dimensions 505 x 500 x 525mm, Compatible with Slic3r, ReplicatorG, Makerware, Simplify3D, Skeinforge, Cura. Note: Shipping weight follows UPS' new dimensional weight regulations.
Using the Monoprice Inventor II 3D Printer is easy. First, connect it to your device via USB cable, USB stick, or WiFi. Make sure your operating system is compatible, like Windows XP or later, Mac OS X, or Linux. Then, load the PLA filament into the extruder. Use the 3.5' color touchscreen to set up your print job, choosing the right settings from the MP FlashPrint software. Before starting, check the bed leveling probe to ensure a good first layer. When the door opens during a print, the automatic sensor will pause the job to keep you safe. If the filament runs out or jams, the filament checker will put the print on hold. As for maintenance, keep the printer clean and free of debris. You can upgrade it with a heated bed for better results. Also, note that the shipping weight is based on UPS' new dimensional weight regulations.
