Hammer Header Female - Solderless Raspberry Pi Connector

If soldering isn't your forte or you don't have a soldering iron, these cool hammer headers from Pimoroni are a great solution. No soldering needed! Just give a few gentle taps with a hammer, and your header will be firmly attached to your Pi Zero or pHAT/bonnet/HAT. Remember to read Pimoroni's fitting guide. These socket headers are easier to insert than male headers as you can hammer directly on the plastic. They work best with the hammer - header jig and pack. But be careful! Hammer at your own risk. We're not responsible for any damage to your Pi, bonnet, headers, or fingers. Follow the guide, and you'll be fine. If you're worried, get a soldering iron instead.

Using these hammer headers is super easy. First, grab a hammer. Then, give a few gentle taps on the plastic part of the header to attach it to your Pi Zero or pHAT/bonnet/HAT. Before you start, make sure to read Pimoroni's fitting guide carefully. When it comes to maintenance, keep the headers clean and dry. As for the important note, using a hammer has risks. We can't be held accountable for any damage to your device, headers, or fingers. If you're not confident, it might be better to use a soldering iron.