If you want to create a personalized HDMI cable using any two of our HDMI adapters, these flexible cables are a must - have! Crafting custom HDMI cables has never been this straightforward. Just pick up one of these cables, and use the flex cable clips to easily swap and change any of the HDMI adapters at both ends. There are numerous options available! This is the 30 cm (about 12 inches) version. Note that the two necessary HDMI adapters are not included. Browse through all the choices in our shop to build your own unique cable. We've tested these DIY cable kits with a Raspberry Pi at 1080P, and they perform excellently. However, keep in mind that they're not as tough or well - shielded as pre - made cables.
Using this DIY HDMI cable part is easy. First, get your two desired HDMI adapters from our shop as they're not included. Then, take the 30 cm HDMI ribbon cable and use the flex cable clips at each end. You can freely swap and switch the adapters to create your custom cable. When using it with a device like a Raspberry Pi, it works great at 1080P. But remember, this DIY cable isn't as durable or shielded as ready - made ones. To maintain it, handle the cable gently to avoid bending it too sharply. Also, store it in a dry place when not in use to prevent damage.
