0.96inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 160×80, SPI

This 0.96 - inch LCD display module is designed specifically for Raspberry Pi Pico. It offers 65K RGB colors and a 160×80 pixel resolution, delivering a clear and colorful display. The module comes with an embedded ST7735S driver and uses the SPI interface, which requires minimal IO pins. It also includes a 1x joystick and 2x user buttons for easy interaction. Along with the module, you'll get development resources and a manual, including Raspberry Pi Pico C/C++ and MicroPython examples. The display panel is an IPS type, and it has a female pin header for direct attachment to the Raspberry Pi Pico. Note that the Raspberry Pi Pico is not included. Check the Pico - LCD - 0.96 WIKI for detailed resources, as they may vary by product.

Using this 0.96 - inch LCD display module with your Raspberry Pi Pico is easy. First, make sure your Raspberry Pi Pico is ready. Attach the module to the Pico using the onboard female pin header. You can then use the provided development resources and manual, which include Raspberry Pi Pico C/C++ and MicroPython examples, to start programming. The 1x joystick and 2x user buttons are there to help you interact with the display easily. When it comes to maintenance, keep the module in a clean and dry place. Avoid exposing it to extreme temperatures or moisture. If you need to clean it, use a soft, dry cloth. Remember, the Raspberry Pi Pico is not included, so you'll need to have your own. Also, check the Pico - LCD - 0.96 WIKI for specific resources as they may differ depending on the product.