0.96'' OLED Screen Module

This awesome 0.96 - inch OLED Screen Module is an ideal choice for your electronics projects. It comes with four pins: GND, 3.3V, Serial Clock (SCL), and Serial Data (SDA). The GND pin serves as a reference for voltage measurements, while the 3.3V pin should be connected to the micro:bit. The SCL and SDA pins need to be connected to Pins 19 and 20 on the Micro:bit as they are the default I2C pins. It can also be used as an OLED Display Module with Arduino.

Using this 0.96 - inch OLED Screen Module is easy. First, connect the GND pin to your circuit as a voltage reference. Then, connect the 3.3V pin to the micro:bit. Next, make sure to connect the SCL and SDA pins to Pins 19 and 20 on the Micro:bit. When using it with Arduino, follow the standard procedures for OLED display modules. As for maintenance, keep it away from moisture and extreme temperatures. Avoid applying excessive force to the pins as this could damage the module. If you notice any issues, check the connections first.